Copper

alloys


 

銅


　

合


　

金 
 S 201 
 Sn1 Si0.3Mn0.3
Cu Rem.
 Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.
機械性能好，抗裂性好。紫銅氣焊及氬弧焊用
 ERCu 
 
S 211 
 Si3 Mn1
Cu Rem.
 Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.
機械性能好，銅合金氬弧焊及鋼的MIG釬焊用
 ERCuSi-Al 
 
S 212 
 Sn5 Cu Rem. 
 Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨性好。銅合金氬弧焊及鋼的堆焊用
 ERCuSn-A 
 
S 213 
 Sn8 Cu Rem. 
 Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨性好。銅合金氬弧焊及鋼的堆焊用
 ERCuSn-C 
 
S 214 
 Al7.5 Cu Rem. 
 Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用
 ERCuAl-A1 
 
S 215 
 Al9 Cu Rem. 
 Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用
 ERCuAl-A2 
 
S 221 
 Cu60 Sn1 Si0.3
Zn Rem.
 Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點約890℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
 　 
S 221F 
 Cu60 Sn1 Si 0.3
Zn Rem.
 S221 welding rod coated with flux.
外涂焊劑的S221焊絲
 　 
S 222 
 Cu58Sn0.9Si0.1
Fe0.8 Zn Rem.
 Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點約880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
 RBCuZn-C 
 
S 222F 
 Cu58Sn0.9Si0.1
Fe0.8 Zn Rem.
 S222 welding rod coated with flux.
外涂焊劑的S222焊絲
 RBCuZn-C 
 
S 223 
 Cu59 Sn0.6
Zn Rem.
 Melting point is about 900℃. Braze welding of copper, steel and cast iron.
熔點約900℃。銅、鋼、鑄鐵釬焊用
 RBCuZn-A 
 
S 224 
 Cu62 Si0.5
Zn Rem.
 Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點約905℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
 　 
Copper
alloys

銅


合


金 
 S 225 
 Cu48 Ni10
Zn Rem.
 Melting point is about 935℃ and high strength. Braze welding of steel, nickel and carbide alloys.
熔點約935℃。高強度,釬焊鋼、鎳及硬質合金用
 RBCuZn-D 
 
S 225F 
 Cu48 Ni10
Zn Rem.
 S225 welding rod coated with flux.
外涂焊劑的S225焊絲
 RBCuZn-D 
 
S 226 
 Cu60 Sn0.3
Si0.2 Zn Rem.
 Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.
熔點約900℃。黃銅氣焊用，也可釬焊銅、鋼、鑄鐵
 　 
S 227 
 Cu58Sn0.9Ni0.5
Si0.1 Fe0.8
Zn Rem.
 Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔點880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵
 RBCuZn-B 
 
S 229 
 Cu55 Ni6 Mn4
Zn余
 Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.
熔點約920℃。高強度,釬焊鋼、鎳及硬質合金用
 

    上海斯米克焊材有限公司地處上海市浦東新區楊南路965號。前身是上海有色金屬焊接材料廠，1991年9月30日與英屬斯米克股份有限公司合資。公司擁有熔煉、連鑄、擠壓、軋制、拉拔、切絲、涂粉、霧化制粉等生產設備100多臺，物理測試、化學分析儀器20多臺。公司先后從國外引進多條生產線及多臺測試儀。同時還自行開發四條生產線。93年通過國家焊接材料檢測中心對公司質量必備條件審查，取得焊條生產許可證。公司是國內有色金屬及特殊焊接材料研制和生產中心。建廠以來，取得科研成果幾十項。93年被市外資委、外經委確認為先進技術企業。99年公司通過ISO9002質量體系認證。

　　公司主要生產有色金屬焊接、防磨堆焊、鑄鐵補焊、釬料及熱噴涂共五大系列一百三十多種焊接材料，廣泛地為機電、冶金、航天、儀表、電力、化工、輕工等各行業服務。公司產品遍及全國各省（市）、自治區。公司在開發國內市場的同時積極開拓國際市場，出口的品種和數量均有大幅度提高。公司生產的青銅及黃銅兩大類焊絲在國際上已有相當?shù)挠绊懀蔀樵S多國際著名焊接行業公司的定牌生產企業。