頻率響應:100-13KHz
靈敏度:-44dB±2dB
參考授話距離:20-120cm
咪管長度:390mm
凈重:0.7kg
IC卡簽到,內置喇叭
嵌入式安裝,可拔插咪管
采用全新數控化設計
具有麥克風具有發言鍵與指示燈,可控制/指示本機狀態
單指向性,具防氣爆音功能,配有防風防護罩
具主席優先控制按鍵,可啟動系統提示音提醒出席人員注意,可設永久終止或暫停終止所有發言代表麥克風的發言狀態
系統中主席單元數量不受限制,并可置于回路中任意位置
系統中主席單元不受限制功能的限制
可繞式電容麥克風桿,并具有發言指示光環
麥克風靈敏度高
單元由系統主機供電,輸入電壓24V屬安全范圍
單元采用8芯線“T”型連接
具有兩組3.5mm立體聲輸出插座,可做錄音及連接耳機用
內置高保真揚聲器,并具有音量調節(當麥克風開啟時喇叭自動靜音)
具有表決/選舉/評議功能
具有自動視像跟蹤功能
配一條麥克風單元連接線
符合國際會議設備電器認證標準(IEC 60914)及國際安規標準UL或CE認證
Chairman Unit SV-M808A (Microphone)
Frequency response: 100-13KHz
Sensitivity: -44dB±2dB
Reference speaking distance: 20-120cm
Length of the microphone tube: 390mm
Net weight: 0.7kg
Embedded installation, removable microphone tube
Adopts brand new numerical control design
The unit has a microphone, a speaking button and an indicator lamp, so the status of the unit can be controlled/indicated.
The microphone is unidirectional, and has the anti-popping function, and is equipped with a windshield.
There is a prior control button in the chairman unit, which can make a system reminding sound to catch the attention of the attendants. The speaking status of microphones of all the speaking attendants can be permanently
The amount of chairman units in the system is not limited, and which can be placed at any location in the loop.
The chairman unit is not confined by the various limits.
Windable capacitor microphone tube, with speaking indicator ring lamp
The microphone is highly sensitive
The power of the unit is supplied by the system master device, and the input voltage is 24V, which is within the safe range.
The unit is connected in “T” form through 8 core lines.
There are two sets of 3.5mm stereo sound output sockets, which can be used for recording and connecting to earphones.
There is a built-in hi-fi speaker with volume adjusting function (when the microphone is turned on, the speaker will be automatically muted).
With vote/election/discussion functions
With automatic image tracking function
Equipped with a microphone unit connection line
Comply with the International Meeting Equipments and Appliances Standard (IEC 60914) and International Safety Standard UL or CE certification