剎車片用摩擦材料專供石墨增碳劑  

 
 
 

 

 

 
固定碳
≥98.5%
灰分
≤0.5%
揮發分
≤0.5%
硫
≤0.05%
水分
≤0.5%
氮
≤0.03%（300ppm）
 
 
 
      石墨化增碳劑產品使用方法：在電爐底部放置爐料三分之一后將計算好的產品放置在
爐料上，（爐中放一部分料后放增碳劑）然后把剩余爐料按要求放在上面，如上面的爐料
較大時應把一些較碎的爐料壓在增碳劑上，以防止漂浮影響吸收率。增碳劑加入量是金屬
量的1-3%，用戶也可根據產品生產質量要求自行調整。增碳劑的特點是碳在鐵液中吸收
效果好，不返渣，使用增碳劑可大幅度降低鑄件生產成本。
 


 
  
Product overview:

Chifeng City Bi source activated carbon factory producing graphite carbon agent, with a high degree of graphitization, low sulfur, low ash, low nitrogen, high content of carbon content, absorption rate is high and fast, elemental carbon in the casting microstructure most to a type graphite appeared, fine, uniform
Graphite, which can promote the formation and the process of the ball, effectively improve the iron graphite system and reduce the production of iron and carbon. Graphite carburant is an additive used in steelmaking, it is essential to producing high quality steel material. In addition, the production of electrode paste.


Product features:
 
1, high fixed carbon, high absorption rate, low sulfur, low nitrogen and in the absorption speed faster than similar graphite carburant, and adsorption of furnace wall, fully absorb the residue free, the price is lower than the similar sulfur is less than 0.05 following the graphitized carbon agent, the highest price.
 
2, the absorption rate is high, according to the method of using the highest rate of 90%.
 
3 absorption speed, faster than similar graphite carburant absorption rate, adsorption of furnace wall and no residue, furnace carbon absorption speed advantage is more obvious.
 
4, the low sulfur, 0.05% the following, the lowest 0.02%. Nitrogen was low, 100ppm.
 
5, the high cost, in the similar graphitization recarburizer (sulfur in the highest price is less than or equal to 0.05).
 
Product use:

Graphitization recarburizer product usage: 1/3 in furnace bottom placed charge will be calculated after the product is placed in the
(charge, put part of the material after the furnace put recarburizer) and then put the remaining charge on it according to the requirements, such as the above charge
Large should put some more crushing burden of pressure on the carburant, to prevent the floating effect absorption rate. Carbon agent added metal
The amount of 1-3%, the user can also be adjusted according to product quality requirements. Recarburizer is characteristic of carbon in liquid iron absorption
The effect is good, do not return slag, can greatly reduce the production cost of castings using recarburizer.
 



    赤峰市碧源活性炭廠 

      廠   址：內蒙古赤峰寧城縣天義鎮富家路東側西環路西側
      聯系人：許雪平
      手   機：
      Q   Q ：3331951604
      郵   箱：3331951604@
      網   址

 

篩下物粒度 : 5（%） ;
揮發分 : 0.5%（%） ;
灰分 : 0.4% ;
篩上物粒度 : 95（%） ;
水分 : 2（%） ;
型號 : BY-03 ;
規格 : 0-1mm 1-2mm 1-3mm 3-5mm 5-10mm（目） ;
固定碳 : 96（%） ;
品名 : 石墨增碳劑 ;

赤峰市碧源活性炭廠是椰殼活性炭、果殼活性炭、黃金炭、煤質柱狀活性炭、煤質顆粒活性炭、粉狀活性炭、凈水活性炭、空氣凈化活性炭等產品專業生產加工的公司，擁有完整、科學的質量管理體系。赤峰市碧源活性炭廠的誠信、實力和產品質量獲得業界的認可。歡迎各界朋友蒞臨參觀、指導和業務洽談。
品牌名稱 : 碧源
質量控制 : 內部