性能與特點 :
由數顯溫控儀調節的溫度,精確而穩定,數字顯示,可上下加熱,單獨開關控制。采用氣動式壓緊,配有雙杯氣源處理器,讓操作更加快捷;修補的位置靠沙袋調整,同時升溫與恒溫均有信號燈指示;具有通電信號指示,電源短路保護,120分鐘定時與常通任意選擇使用的特點;連續開機10小時耗電量僅為1-2度,經濟耐用,使用方便。
Features and performance:
The temperature is controlled by digital readout temperature control device, precision and stabilization, digital display, heating up and down, single switch control. Air-operated press tightly, equipped with double-cup air source processor to accelerate operation. The repair position adjusted by sandbag, and temperature tise or constant has the signal indication.
It features galvanical signal indication, short circuit protection, 120 minutes working time setting or always working setting optionally. Power consumption is only 1-2o after turn on for 10 hours, easy operation, convenient using, really a economical and practical machine.
主要適用范圍:各種型號內胎和中小型外胎與真空胎。
Be suitable for various tyre tubes, medium and small outer tubes and tubeless tyres.
技術參數 Parameters
輸入電壓 Input Voltage: 220V
輸入功率 Input Power: 450W*2
工作壓力 Operating Pressure:0.6Mpa
溫度范圍 Temperature Range: 0℃-300℃
修補面積 Repair Area: 80*70mm2
毛/凈重 G.W./N.W.:66.5kg/62.5 kg
包裝尺寸 Packing Size:740*320*1495 mm
-- : --- ;
硫化溫度 : 0-300(℃) ;
輪胎直徑范圍 : 中小型輪胎或真空胎(mm) ;
功率 : 450*2(W) ;
電壓 : 220(V) ;
型號 : AJD-Q ;
品牌 : -- ;
類型 : 汽車補胎機 ;
加工定制 : 是 ;